Instruction Manual for BabyMilk

  • Press the button to start the unit.

  • Fill the base with water - do not pass the MAX line.

  • Turn the dial to the appropriate time, based on the bottle’s size, material and on the quantity of milk.

  • At the end of the cycle, there is an audible signal (5 beeps) and flashing indicator light.  Press the button again and the unit will stop beeping, then unplug the appliance.  

CLEANING AND MAINTENANCE

  • Before cleaning, unplug the appliance and allow it to cool down completely.

  • Never immerse the housing in water to clean.

  • Wipe the outside surface with a wet cloth.

  • Do not use corrosive detergent, detergent with chemical powders or hard metal wire mesh to clean, as this will damage the appliance surface, affect the service life and cause safety problems.

  • Do not use sharp items or metal tools to touch components in the middle of the heating plate, as this may cause electric shock.

  • When not in use, clean and dry the appliance, and then put it into the packing box and store it in a dry place with good ventilation.

  • Steam cover and baby bottle tray are dishwasher safe and can be sterilized.  

  • We recommend you use fresh water to warm milk and sterilize utensils for every use.

  • Every 50 cycles, fill the tank with water and white vinegar or the Beaba cleaning product for Babycook (15 ml white vinegar + 15 ml water).

  • Leave to soak until deposits have completely disintegrated (one night).

  • Rinse with clear water several times.  

  • 89
  • 22-May-2018
  • 2443 Views